FT-304绝缘材料表面/体积电阻率测试仪

FT-304绝缘材料表面/体积电阻率测试仪

FT-304 The insulation material surface and volume resistivity tester

概况Overview：

16次方超高阻量程，配置抗干扰屏蔽箱，多量程档位测量；液晶显示，自动读取电阻，电阻率数据，稳定性好，PC软件数据过程分析.解决绝缘材料电性能的测量.

16 power of ultra high resistance range. Configuration anti-interference shielding box. Multi-range gear measurement. Liquid crystal display. Automatic reading resistance. resistivity data. good stability. PC software  data process analysis. Solving the electrical properties measuring of insulation materials.

二.适用范围Scope of application：

测量橡胶、塑胶、粉末、颗粒物、电子元器件、介质材料、电线电缆、防静电产品、如防静电鞋、防静电塑料橡胶制品、计算机房防静电活动地板等电阻值等绝缘性能的检验和电子电器产品的绝缘电阻测量。本仪器测量高电阻测微电流。

Measuring rubber. plastic. powder. particulate materials. electronic components.dielectric material . wire and cable.  anti-static products. such as anti-static shoes. anti-static plastic rubber products. Check the insulation performance of the computer room anti-static activity floor and the insulation resistance measurement of electrical appliance products. The instrument measuring high resistance measuring micro current.

三.技术参数technical parameters

1、电阻测量范围/ Resistance measuring range： 104Ω ～1×1016Ω

电 阻 率/ Resistivity： 104 ～ 2.0×1016 Ω-m；

2、液晶显示: 电阻率、压强、温度、电导率、电流电压、可输入测试样品数据（圆柱：直径，高度；方体：长*宽*高）单位可以切换（mm、cm、m）

LCD: resistivity. pressure. temperature. conductivity. current voltage. input test sample data(cylinder: diameter. height. cube: L * W * H) unit can be switched（mm、cm、m）

3、内置测试电压：0-1000V任意可设定

Built in test voltage: 0-1000V can be set freely.

4、基本准确度accuracy：5%

5、使用环境: 温度：0℃～40℃，相对湿度<80%

environment: temperature：0℃～40℃，relative humidity <80%

6、机内测试电压: 10/50/100/250/500/1000V任意切换

Inside machine test voltage: 10/50/100/250/500/1000V set freely.

7、供电形式Power supply: AC 220V，50HZ，功耗约5W

8、测量模式：手动/自动量程。带PC测试软件（选购），USB通讯接口，软件界面同步显示、分析、保存和打印数据！

Measuring mode: manual / automatic range. With PC test software (optional). USB communication interface. synchronous display of software interface. analyze. save and print data.

9、常用电极(夹具)装置有（选购）：

A型：固体状三环电极装置；B型:粉末状加压装置   C型:棒状测量电极装置

Commonly used electrode (fixture) device (optional):

Type A: solid three-ring electrode device. Type B: powder pressurized device. Type C: rod-shaped measuring electrode device.

配套方案：解决各材料状态 --固态、液态、气态、颗粒状电阻、电阻率、电导率测量

ROOKO瑞柯品牌-------专注于新材料测量与分析仪器解决方案  

----解决材料：导体、半导体、绝缘材料常温及高温等环境下电性能分析.

----我们一直在做：研发、生产、销售、租赁、实验室样品分析及后延扩展服务.